INDUSTRIAL LASER TRENDS

CHOOSE A CATEGORY
  • All
  • Co2 laser solutions
  • FAQ
  • Fiber laser solutions
  • Uncategorized

How do you adjust the laser to the center of the nozzle?

Cutting quality in a great extent depends on whether the lens is in the middle. If the lens is not in the middle, the laser beam may contact with the nozzle or inner wall to produce high-temperature deformation. Lens alignment operation should be considered when the nozzle is replaced or ...

3KW Or 6KW Water Chiller Maintenance

What is The role of the water chiller? Water chillers are an individual application of industrial refrigeration machines to laser machines. They are mainly used to circulate water to cool the laser resonator of laser machines and control the operating temperature of the laser resonator so that the laser resonator ...

Bystronic Co2 Laser Convert Into Fiber Laser  FAQ

Why Need To Convert Co2 to Fiber Laser? Fiber lasers are gradually replacing CO2 lasers; many customers buy a CO2 laser cutting machine at the beginning, but with the development of production capacity and the efficiency requirements, fiber laser cutting machines gradually highlight the advantages of this time to encounter ...
2000w wedling machine

The Most Important Factors For Handheld Laser Welding Machine

Marketing Information Fiber laser welding machines have become a lot of industries are extremely important welding equipment for improving the quality of enterprise products; quality has an important value. Fiber laser welding machine is not only in the processing of metal materials but can better soften the processing, while the ...
fiber laser machine

How To Buy A Laser Machine From China?

If you’re in the market for a fiber laser cutting machine, you may be considering purchasing one from China. While this can be a cost-effective option, it’s important to take certain steps to ensure that you’re getting a quality machine that meets your needs.  1. Research the manufacturer  Look for ...
precitec-laser-cutting-head

Laser Cutting Head Installation

Introduction The fiber laser cutting head is the core component of the laser cutting machine and directly affects the cutting performance. The cutting head is composed of an optical fiber laser interface locking device, an internal optical lens (including collimating lenses, focusing lenses, protective lenses, etc.), an internal cooling water ...
hans laser cutting

Which Is The Best Laser Cutting Machine In China?

With the rapid development of the laser cuting industry, the demand for laser-cutting machines in various industries is increasing quickly.  When many people choose laser cutting machines, they are faced with various brands. Many manufacturers can not tell which machine has a higher performance-to-price ratio and better quality.  In order ...
6kw fiber laser cutting

How To Avoid Deburring?

When using the laser cutting machine for cutting, it is found that the cut workpiece has a lot of burrs and the quality is not good, so it is suspected that there are problems with the laser cutting machine.  Is that really the reason?  Not necessarily.  In most cases, the ...
fiber laser cutting

How To Check The Quality Of Laser Cutting Performance?

The application of laser cutting of metal materials has been widely known, but many people do not know how to check the cutting quality when using laser cutting machines.  In fact, the cutting quality is usually judged from the angles of end face roughness, bottom burr, verticality, slit width, and ...

Ask For A Quote